The WH1054CSCX acid-neutralizing filter well treatment system corrects pH between 5 & 7. A pH correction stops blue/green staining of sinks, toilets, tubs, and showers and improves water taste by stopping the corrosion of copper pipes.
A combination of Magnesium Oxide and Calcite is used to achieve a balanced reaction in differing flow conditions. Magnesium Oxide dissolves faster and is best for high flows. Calcite produces a much slower reaction and works best for low flow rates. The combination provides even pH correction for homes with varying flow rates.
The Fleck 5600SXT backwashing control valve provides sediment filtration between 10 – 20 microns. Sediment is trapped in the media bed and backwashed automatically.
The Structural 10″ × 54″ Polyglass tank has a removable dome hole cap for ease in adding media to the tank. As the water passes through the media bed, the minerals dissolve in the water to neutralize the acid. As a result, the media bed diminishes and must be replenished from time to time. The dole hole allows replenishment to be performed without disconnecting the plumbing.
H2O WH1054CSCX, Acid Neutralizing Backwashing Well Treatment System, 8-10 GPM Benefits:
- Acid Neutralizing Filter stops Blue/Green Staining
- Stops Corrosion of Copper Pipes & Metal Plumbing Fixtures
- Improves Water Taste by Removing Metalic Copper Taste
- Removes Dirt, Rust and Sediment with Automatic Backwash
- Installs on Main Line, Treats all Water Through Entire Home
Well water system assembly instructions included with this system.
The blue/green staining shown in the image is a result of copper corrosion caused by low pH, acidic water.
Features:
- Magnesium Oxide and Calcite Media Bed
- Fleck 5600SXT Backwashing Valve Cleans and Regrades Media
- Structural Polyglass Tank with Removable Dome Hole
- Funnel, Rubber Bands, and Extra Media Included
- pH Correction Between 5 – 7
- Flow Rate 8 – 10 GPM: Peak flow rate 10 GPM
- 1″ MPT Noryl Yoke Standard Connection & Bypass Valve
- Replenish Media through Removable Dome Hole
